Sunday, July 31, 2011

Crochet The Tezzie Hat

The Tezzie Hat

Look for me on Face Book And Like My Page More Free Patterns

Close up of the Tezzie stitch

The Tezzie hat with the hat edge completed


HAVE YOU MADE A TEZZIE HAT?
CONTACT ME TO PLACE YOUR PICTURE IN THIS POST


Clorinda Espinoza made this rasta version.
 


Hook size: AU 4.00mm. US G/6
Yarn ply: AU 8 ply. US 4 ply approx 50 gm’s
Tension: See basic crown
US terms used
Beginner +
St’s used:
Ch= chain
Sl st= slip st
Sc= single crochet
Dc= double crochet
Fpdc=front post double crochet
Bpdc= back post double crochet
Trbl= treble
Fptrbl= front post treble
Introduction: Hat pattern is worked over 3 rows. 
The set up row,

the pattern stitch row,

the completion row

Special stitch= 4 fptrbl’s worked around the 2nd dc of the skipped dc of the row below

The stitch count for the pattern is over 6 st’s and repeated around
 
To begin complete the basic dc crown for the size you want, the beginning ch 3 is counted as a stitch
Pattern rows:

Row 1: ch 3, work 1 dc in next dc, ch4, skip next 4 dc, *work 1 dc into each of the next 2 dc, ch 4, skip next 4 dc,* repeat from *to* to end, sl st into top of beginning ch 3 to join round

Row 2: ch 3, work 1 dc in next dc, work 4 fptrbl’s around the 2nd skipped dc of the row below, *working back on this row, work 1 dc into each of the next 2 dc, work 4 fptrbl’s in the 2nd skipped dc of the row below,* repeat from *to* to end, sl st into top of beginning ch 3 to join round

Row 3: ch 3, work 1 dc in each stitch around, sl st into top of beginning ch 3 to join round, please count your dc’s, you should have the same amount of dc’s as you did before you began the pattern rows

For both small and medium to large size hat, repeat pattern 3 more times (4 times in all, 12 rows in total)

 Height with out the hat edge, slightly stretched, is approx 8 inches high

Begin hat edge: the beginning ch 3 will not be counted as a st

Row 1: ch 3, work a fpdc around same st, work a bpdc around next dc, *work a fpdc around the next dc, work a bpdc around the next dc,* repeat from *to* to end, making sure to end with a bpdc, sl st into top of beginning ch 3 to join round

Row 2: ch 3, *work a fpdc around the fpdc, work a bpdc around the bpdc* repeat from *to* to end, sl st into top of ch 3 to join round

Your hat, (slightly stretched) should now be approx 9 inches in height, you can finish off here or repeat row 2 of hat edge for a higher hat height


The pattern stitch can be worked into any hat that is devisable by 6 dc, such as 12, 24, 36, 48 and so on. 




Another great video tutorial by Bobwilson123 visit her on face book or you tube for more free video tutorials! Thanks Bob!



Please do not sell my pattern or claim it as your own. You can make and sell items from my hat pattern, I would be most pleased if this pattern was used for a charitable event. I would love to see your completed items.

Thursday, July 28, 2011

Crochet Basic DC Crown



The basic dc crown can be used for the beginning of many hat designs.
The measurements given are an approximate as many yarns will differ from brand to brand.
I am using an AU 8 ply yarn (US 4 ply) and a 4.00mm hook (US G/6)
 The crochet terms I use are US
I will be giving instructions for a small adult and medium to large adult, both reflecting woman's sizes.
Stitches used are:
chain
DC= double crochet
Sl st= slip stitch
Tension: see pictures below for measurements
Notes: the beginning ch 3 is counted as a dc.

To begin: Ch 4 or make a magic ring
Row 1.Work 11 dc into 4th chain from hook, sl st to join in top of ch 3. (12 dc)...(or work ch 3 and 11 dc into the magic ring)
Row 2. Ch 3, work 1 dc in same place as ch 3, work 2 dc in each dc around, sl st to join in top of ch 3 (24 dc)
Row3.  Ch 3, work 2 dc in next dc, *work 1 dc in next dc, work 2 dc in next dc,* repeat from *to* to end, sl st to join in top of ch 3 (36 dc)
Row 4. Ch 3, work 1 dc in next dc, work 2 dc in next dc, *work 1 dc in each of next 2 dc, work 2 dc in next dc,* repeat from *to* to end, sl st to join in top of ch 3 (48 dc)
Row 5. Ch 3, work 1 dc in each of next 2 dc, work 2 dc in next dc, *work 1 dc in each of next 3 dc, work 2 dc in next dc,* repeat from *to* to end, sl st to join in top of ch 3 (60 dc)
Stop increasing here for a small adult hat.
Row 6. Ch 3, work 1 dc in next 3 dc, work 2 dc in next dc, *work 1 dc in each of next 4 dc, work 2 dc in next dc,* repeat from *to* to end, sl st to join in top of ch 3 (72 dc)
Stop increasing here for a medium to large adult hat 
You are now ready to work with out increasing.

Work 1 dc in each st around, sl st to join in top of ch3.
Repeat above round with out increasing for hat height desired.

You also have the option to use a stitch pattern in the hat, once the crown has been established.
If you choose to do this you will need a stitch pattern that is dividable by the amount of st's you already have.
  Keeping in mind that you will be joining the pattern round.
It will not matter too much if you need to increase/decrease a stitch or 2 for this to happen.
The average hat height is about 9 inches or 11 inches with a folded brim.


 We can also work the crown rounds in multiples of 10 dc's, this is particularly useful for the in between sizes and varied tensions.
Using the instructions above begin with 10 dc, increasing in rows to 20, 30, 40, 50, 60, 70.
 
Once again a big thank you to Bobwilson123 for an excellent learning video tutorial!


I hope that you have found these instructions useful.
Please like me on face book or and comment on my face book page for more user information.
I am always more than happy to help.

Google

Tuesday, July 26, 2011

Tunisian Entrelac Stitch Count

I am writing this post to keep some information stored for myself and for others who may need it too.
I happened across a video tutorial made by Bethintx1 (her you tube channel).
The video was a crochet along making an afghan with the tunisian entrelac method.
The out come of her afghan was just lovely.
But I wanted to down size my project and just followed along for 3 rounds and a, half squares round for my face cloth.
The next face cloth I did I made some improvements on and I did a sc border, simple but it looked nicer, so I went back to my first one and did the same thing.
I really wanted to know the break down of the stitch count, so I could make other shapes and items with this pattern.
I asked the professional, Beth!
I had this st count. 
( 2 diamonds = 21 chain, 3 diamonds = 31chain, 7 diamonds = 71 chain...) think I found it, cheers Cat :)
This is the st count and explanation she gave me.
 10 for the square and one for the joining chain between the squares. so if you start with 7 squares, it would be 70, plus 6; because there are six joinings between the 7 squares.



(2 diamonds= 21 chains, 3 diamonds 32 chains, 4 diamonds = 43 chains, etc. )

I am officially excited to have the formula.
Below is the beginning of the video tutorial I crocheted along with, thank you Beth.

Thursday, July 21, 2011

Crochet Preemie Baby Hats


I am currently making baby hats for preemie baby's,some are small enough for the precious ones we loose. I will be donating these and more to my local country hospital.
I got the sizing from Bev,s blog link here.

 I made mine with AU 5 ply and a 3.5m hook.
I began the first round with 12 dc.
Ch 4, work 11 dc into 4th ch from hook, sl st to join round

Second round was increased to 24 dc.
ch 3, work 1 dc in same space, work 2 dc in each dc around, sl st to join round

Third round was increased to 36 dc.
Ch 3, work 2 dc in next dc, *work 1 dc in next dc, work 2 dc in next dc* repeat from *to* to end, sl st to join round
The hat measure's approx 22 cm around.

I made 5 more rounds in dc (work 1 dc in each dc to end of round, sl st to join round, repeat 4 more times (5 times in total)
Then I did 2 rounds of hdc for the rim of the hat.
Work 1 hdc in each st around for 2 more rows, finish off, weave in ends.
My hat length is approx 7.5 cm long.

These little hats can be difficult to measure with a tape, you can take some yarn to place around your hat circle and place it against the tape to get your measurements.
All hats have a small pattern piece in them to make them more appealing.